Like the Scan function, the Memory Scan function will cycle VHF radio sequentially through the channels, but only those which have been pre-selected.

Practise on the VHF radio simulator

Before switching on Memory Scan function, at least two channels should be added to the Memory Scan cycle. When the Memory Scan function is not running channels could be added and removed from the Memory Scan cycle. For both operations select the channel to be added, then press and hold down the M/S softkey (double beep). To switch on the Memory Scan function, press the M/S softkey.

The receiver stays on the channel on which the transmission is being made. The channel on which the receiver stays could be:

• advanced: press Adv softkey to manually advance to the next channel in the scan sequence,
• inhibited: press Del softkey to inhibit the channel from the scan cycle (rather than pressing Adv softkey each cycle).

To exit Memory Scan mode, press the C key or the 16 key.